E-Bikes & Bikes Customised to You
Dustin Gyger
Updated On: November 18, 2026
Why the Display Is Worth Five Minutes of Your Time
Most people who buy an electric trike want to ride it, not study it. That's the right instinct. The trike is there to get you to the farmers market, around the lake, or across town with a grandkid in the back seat, and nobody wants to spend the first sunny afternoon squinting at a little screen on the handlebars. Still, the display is the one part of the trike that talks back to you. It tells you how hard the motor is working, how fast you're moving, how far you've gone, and how healthy the battery looks. Ignore it entirely and you're riding with half the information you paid for.
In a recent walkthrough video, Peter from the sixthreezero team sat down with the EVRYjourney 750W electric rickshaw and ran through the three basic display screens, what each number means, and how to make the one change most riders will actually want to make: resetting the trip counter. This article follows that walkthrough, fills in the context around each reading, and adds some practical advice on how to use the numbers once you understand them.
The good news is that the daily-use part of the display is simple. There are three screens. You flip between them with a single button. Two arrow buttons handle assist level. A two-button squeeze resets your trip. That's the whole routine. Everything else in the menu is either set at the factory or tucked away for situations most riders will never run into, and we'll talk about that near the end.
If you're still shopping and wondering what living with one of these machines is like, this is a useful peek behind the curtain. The same basic layout shows up across many of our electric tricycles, so even if you end up on a different model, the logic here will carry over.
Before getting into the screens themselves, it helps to know what your fingers are working with. The display setup on the EVRYjourney uses three buttons: a power button and a pair of up and down arrows. That's it. There's no touchscreen, no app pairing required to read your speed, and no maze of menus you need to navigate before every ride.
The power button does double duty. Hold it to turn the system on, and once the trike is awake, a quick single press cycles you from one display screen to the next. Press it once and you move from the default screen to the second screen. Press again and you land on the third. Press once more and you're back where you started. Think of it like flipping pages in a very short book that loops back on itself.
The up and down arrows control your pedal assist level while you ride, which is the thing you'll touch most often. They also have a second job: press and hold both of them together and you enter the trip reset mode we'll cover later. Because both functions live on the same two buttons, it's worth getting a feel for the difference between a quick tap (change assist) and a deliberate, simultaneous hold (reset). In practice the hold takes about three seconds, so you're very unlikely to trigger it by accident while riding.
A small piece of advice from experience: learn these buttons while the trike is parked. Sit on the seat, turn the system on, and press through everything a few times before you ride. Your thumb will find its way much more naturally when you're actually moving, and you won't be looking down at the bars when you should be watching the road.
The first screen is what Peter describes as the default, and it's the one you'll probably leave up for the bulk of your riding. It's built around what you need to know right now, in the moment, with your hands on the bars.
Across the top, you'll see two numbers tied to your most recent ride: the ride time and the distance. In the video, the trike had just come back from a quick test loop, so the screen showed a three-minute ride covering 0.4 miles. These are trip figures, meaning they reflect the current or last ride rather than the life of the trike. That distinction matters, and we'll come back to it when we talk about resetting.
Off to the side is the assist level indicator, which runs from zero to five. In the center, big and easy to read, is your speed in miles per hour. That's the number most riders glance at constantly, and it's placed where your eyes naturally land.
Down at the bottom sits the temperature. By default it shows ambient temperature, which on the day of filming read 86 degrees. Peter noted, with some amusement, that it didn't actually feel that warm outside. That's a fair caution for any handlebar thermometer: the sensor sits on a trike that may have been parked in the sun, so treat the number as a rough guide rather than a weather report. The display can also be set to show motor temperature in that same spot, if you'd rather keep an eye on how hot the drive system is running.
For a typical ride around the neighborhood, this one screen covers almost everything. You can see how fast you're going, how much help the motor is giving you, and how far you've traveled since you set out.
The assist level is the single most useful control on the trike, so it deserves a closer look. On the EVRYjourney, you have six settings: zero, then one through five. You step through them with the up and down arrows.
Level zero means no assist at all. The motor stays out of the way, and the trike rides like a regular, non-electric tricycle. That's handy more often than you might expect. Some riders like to warm up with a few minutes of unassisted pedaling. Others drop to zero on flat, easy stretches to stretch their battery range, or simply because they want the exercise. It's also a useful fallback if you ever want to ride gently through a crowded area where you'd rather have full manual control over your pace.
Levels one through five add progressively more help from the motor as you pedal. Level one is a light nudge that makes the trike feel a bit lighter than it really is. Level five gives you the strongest boost and the most effortless ride. Most people settle into a comfortable middle setting for everyday cruising and then bump it up for hills, headwinds, or when they're carrying a passenger in the rear seat.
That last point is worth stressing for rickshaw and passenger trike owners. A loaded trike behaves differently from an empty one. With someone riding along in back, starting from a stop takes more effort and climbing takes more energy. Clicking up a level or two before you push off makes the start smoother for you and more comfortable for your passenger.
A few habits make assist levels easier to live with. Shift down before you stop rather than after, so your next start isn't too abrupt. Use higher levels as a tool, not a default, if you want to get the most distance out of each charge. And if you're new to electric trikes, start low. Get used to how the trike responds at levels one and two in a quiet parking lot before you try five on a busy street.
The speed readout in the center of screen one is straightforward, but it's still worth thinking about how you use it. On a three-wheeled machine, speed and stability are closely linked. Trikes are wonderfully steady going straight and at low speeds, which is a big part of their appeal, especially for riders who've moved away from two wheels. Where they ask for more care is in corners. Unlike a bicycle, a trike doesn't lean into a turn, so carrying too much speed into a sharp bend can feel unsettling.
Glancing at your speed as you approach a turn is a simple habit that pays off. If the number is higher than you'd like, ease off the pedals and bring it down before the corner, not halfway through it. Over time you'll develop a feel for comfortable cornering speeds and won't need to check as often, but early on the display is a great teacher.
The temperature readout is less critical day to day, but it's useful information. Ambient temperature gives you a sense of conditions, which can matter for comfort and for battery behavior; lithium batteries generally don't deliver their best performance in cold weather, so a chilly reading can help explain a ride that drains the battery faster than usual. Switching that slot to motor temperature is an option for riders who do a lot of hill climbing or carry heavy loads and want a sense of how hard the motor is working.
As Peter pointed out, the ambient figure can read a bit high, likely because the sensor and housing pick up heat from sitting in the sun. Don't plan your wardrobe around it. Use it as a relative indicator instead: if it's reading much higher than usual, you're riding in real heat, so bring water and take breaks.
Press the power button once from the default screen and you land on screen two. Where the first screen is about right now, this one is about the bigger picture. It pulls together information from all your rides, not just the last one.
At the top is total ride time, the cumulative time you've spent riding the trike. On the brand-new rickshaw in the video, that number was 58 minutes across every ride so far. On a trike you've owned for a year, it might be well into the hundreds of hours, which is a satisfying number to watch grow.
Next is average speed. On the demo trike it came out to about 8.6 miles per hour. That might sound modest, but it's a realistic picture of how people actually ride: it includes slow starts, cruising through neighborhoods, easing around corners, and all the gentle stretches in between. Average speed is a good reality check if you're planning a trip and want to estimate how long a route will take. If you know you average around eight or nine miles per hour, a six-mile loop is roughly a 40-minute outing, give or take.
Then comes the odometer, which records the total distance the trike has ever covered. On the demo rickshaw it showed 6.4 miles. Peter was clear about one important detail: the odometer doesn't change. You can't reset it. It's a permanent record, much like the odometer in a car, and that's exactly what makes it useful. It tells you how much use the trike has seen, which helps you keep track of maintenance like checking tire wear, brake pads, and chain condition.
Finally, the temperature appears again at the bottom, so you don't lose that reading as you flip between screens.
It's easy to treat the odometer as trivia, but it's one of the more practical numbers on the display. Like any vehicle, an electric trike benefits from regular attention, and mileage is the simplest way to know when that attention is due.
A sensible approach is to jot down the odometer reading whenever you do something to the trike: adjust the brakes, top up tire pressure, clean and lube the chain, or take it in for a tune-up. Over time you'll learn how many miles your brake pads last on your typical routes, or how often your tires need air. Riders who do a lot of stop-and-go riding, carry passengers, or ride hilly terrain will see wear sooner than someone who cruises flat bike paths, and your own odometer history is the most accurate guide you'll get.
The odometer is also a quiet motivator. Watching the number climb from single digits into the hundreds is a real sense of accomplishment, particularly for riders using their trike to stay active or rebuild confidence after time away from cycling. Some people set mileage goals for the month or the season. Others just enjoy looking back and realizing how much ground they've covered.
If you ever need support, warranty help, or a mechanic's opinion, the odometer reading is useful information to have on hand, too. It gives whoever is helping you a clear sense of how much the trike has been used. You can read more about coverage on our warranty page, and our assembly instructions are a good reference if you're doing basic setup or adjustments yourself.
Press the power button again and you reach screen three. This one keeps total ride time at the top, so that figure follows you across two of the three screens, and adds two new readings.
The first is max speed. On the demo rickshaw it read 15.9 miles per hour, which Peter described as the fastest the trike reached on the last ride. It's an interesting number to check after a ride, particularly after a long downhill. If you notice your top speeds creeping higher than you're comfortable with, especially with a passenger on board, that's a cue to use your brakes earlier on descents and keep things under control.
The second new reading is battery voltage. Peter's take was refreshingly honest: it's not the most important number for most riders. But it does tell you something real about the battery, and once you understand what it means, it can be a handy reference.
The EVRYjourney runs on a 48-volt battery. On the day of filming, the display showed 49 volts. Peter's rule of thumb is simple: you want to see a number somewhere in the neighborhood of 48 volts, and usually a little more than 48. A reading in that range suggests the battery is in a normal, healthy state.
As always, the ambient temperature sits at the bottom of this screen as well. One more press of the power button and you're back to the default riding screen, ready to go.
Voltage confuses a lot of new e-bike and e-trike owners, so a little background goes a long way. The "48-volt" label on a battery is its nominal voltage, a sort of average or reference rating. The actual voltage you see on the display moves around a bit depending on how charged the battery is and how hard it's working at that moment.
Generally speaking, a freshly charged battery reads above its nominal number, and the reading drifts down as you ride and use up the charge. That's why seeing 49 volts on a 48-volt system is perfectly normal and nothing to worry about. You may also notice the number dip briefly when you accelerate hard or climb a steep hill, then recover once the load eases off. That's the battery responding to demand, not a sign that something is wrong.
For everyday purposes, the battery level indicator on your display is the easier way to judge remaining charge. The voltage reading is more of a diagnostic tool. Where it really earns its keep is if something feels off. If the trike seems to lose power quickly, or the battery doesn't seem to be holding a charge the way it used to, noting the voltage when fully charged and again after a typical ride gives our support team concrete information to work with.
A few simple battery habits will help you get the most from your trike over the years. Charge with the charger that came with it. Avoid storing the battery completely empty for long stretches. Keep it out of extreme heat and cold when you can, and bring it indoors to charge in winter. If you ever need a replacement or a spare, you'll find options under batteries and chargers.
One question comes up again and again: why does the trike track distance in two places? The answer is that the two numbers serve different purposes, and once you see it, the setup makes a lot of sense.
The trip figures on screen one, labeled distance along with ride time, are meant to be temporary. They show what you've done on a particular outing, and you can wipe them back to zero whenever you like. The odometer on screen two is permanent. It keeps counting across every ride for the life of the trike, and it can't be reset.
Peter put it this way in the video: the trip reading is your last ride, while the odometer shows your cumulative total. Having both lets you answer two very different questions. How far did I go today? Check the trip. How much has this trike been ridden overall? Check the odometer.
The trip counter is where the fun is. Reset it before you head out and you'll know exactly how far that new route to the beach really is, or how long the loop around the park takes at your normal pace. If you're trying to build up your endurance, resetting before each ride lets you track progress from week to week. And if you're planning longer outings, knowing the real distance of your favorite routes makes it much easier to judge whether your battery will comfortably cover the round trip.
Resetting the trip is the one adjustment most riders will make regularly, and it's simple once you've done it a couple of times. Here's the process as Peter demonstrated it.
There's one catch, and Peter ran into it himself on camera. The flashing only lasts for a short window. If you wait too long before pressing the power button, the display stops flashing and the reset doesn't happen. No harm done; just hold both arrows again until the numbers start flashing and press the power button a little sooner this time.
Remember that this only clears the trip readings. Your odometer and your total ride time stay exactly as they were. You can't accidentally wipe out the trike's lifetime history by resetting a trip, so feel free to reset as often as you like.
Knowing what each number means is one thing. Using that information to make your rides better is where the display really pays off. Here are a few ways riders make the most of it.
Learn your range. Reset the trip at the start of a fully charged ride and note the distance when the battery level gets low. Do this a few times on your normal routes, at your normal assist level, and you'll have a realistic sense of how far you can go. Real-world range varies with rider weight, passengers, cargo, hills, wind, temperature, and assist level, so your own numbers beat any spec sheet.Plan outings with average speed. Your average speed on screen two is a reliable way to estimate ride times. Combine it with a known trip distance and you can plan errands, pickups, or scenic loops with confidence.Set assist with intention. Try a ride where you stay a level lower than usual and compare the battery level at the end. Many riders discover they can comfortably ride at a lower level on flat ground and save the higher settings for hills, which stretches each charge noticeably.Keep an eye on max speed with passengers. If you're carrying someone in a rickshaw or cargo trike, checking max speed after a ride is a gentle reminder to keep things comfortable for the person in back. Smooth, moderate speeds make for happier passengers.Track your progress. If your goal is fitness or simply getting outside more, the trip counter and total ride time are a simple, honest record of your effort. You don't need a fitness tracker to see that you're riding more this month than last.
Peter was candid that the display can do quite a bit more than these three screens. There are deeper settings tucked into the system. But as he put it, those settings get fairly complicated, most of them are configured at the factory, and much of it is stuff the average rider simply doesn't need.
That's a deliberate choice, and a good one. The trike arrives set up to ride well out of the box. For daily use, the three screens and the controls covered here are all you'll touch: switch screens with the power button, change assist with the arrows, and reset your trip with the two-button hold.
Our advice is to resist the urge to explore the advanced menus just to see what's in there. Changing settings without knowing what they do can affect how the trike performs, and it can be tricky to get things back the way they were. If there's something specific you want to adjust, reach out first. Our team can walk you through it or point you to more detailed resources. You can get in touch through our contact page, and we have more videos on these topics in our video blog.
If a display ever gets damaged, or you're looking to replace one, you can browse eBike displays in our parts section. Just double-check compatibility with your specific model, or ask us before you order.
If you'd like a short summary to keep in mind, here's the whole routine in a nutshell.
That's genuinely everything you need for daily riding. After a week or two, you won't think about any of it; your thumb will just know where to go.
A display is only as useful as the rides it measures, so the real next step is simple: get out and ride. Reset your trip, pick a route you enjoy, and pay attention to how the numbers line up with how the ride felt. Within a few outings you'll have a clear picture of your range, your comfortable speeds, and which assist levels suit your routes.
If you're still deciding which trike is right for you, our fitting consultation matches you with a model based on your body and how you plan to ride. You can also browse electric trikes for seniors, models with throttle control, or options with a high weight capacity if you plan to carry passengers or cargo. Every ride comes with our 30-day test ride, so you can get to know the trike, display and all, on your own streets.
And if you have questions about your display, your battery, or anything else, the Bike Advice section is full of practical guides from the people who design and ride these machines every day. Happy riding.
GET YOUR PERSONAL FITTING CONSULTATION
No chatbots. No quizzes.
No chatbots.
No quizzes.
Just honest advice from Dustin — our real bike expert.
GET YOUR PERSONAL FITTING
CONSULTATION
No chatbots.
No automated
quizzes.
Just honest advice from Dustin — our real bike expert.
Dustin
Head Fit Specialist · sixthreezero
WHAT ARE YOU HERE TO FIT?