Styles

Styles

Your PERFECT BIKE Starts Here

E-Bikes & Bikes Customised to You

→

Take Up to 50% Off All Bikes for a Limited Time!

Come Test Ride Our Bikes! Learn More Here

Take Your Rides to the Next Level. Download Our App Here

First Ride Setup: The Complete Checklist for Your New Ebike or Electric Trike

Why the First 20 Minutes Matter More Than the First 20 Miles

Your new ebike or electric trike just showed up on the porch. You pulled it out of the box, followed the steps, tightened what needed tightening, and now it's standing in the driveway looking ready to go. If you've ever built a bookshelf from a flat-pack box, you probably found the assembly pretty manageable. Our bikes ship mostly built, and the assembly instructions walk you through the rest.

Here's the thing, though. Getting the bike assembled and getting it ready to ride are two different jobs. Assembly puts the parts together. Setup makes sure those parts are adjusted for your body, inflated correctly, tightened properly, and behaving the way they should before you trust them at 15 or 20 miles per hour.

The good news is that a proper first-ride check doesn't take long. Budget 15 to 20 minutes. Grab a pump, a basic set of hex keys, and maybe a rag. Then work through the checklist below from top to bottom. None of it requires mechanical training, and every step pays you back in comfort, confidence, and safety the moment your wheels start turning.

We've organized this guide in the same order we'd walk through it with you in person: fit first, then tires, then the mechanical parts, then the electronics, and finally how to actually take that first ride without scaring yourself. If you'd rather watch than read, this article is based on one of our videos, and you'll find plenty more in our video blog.

Step One: Set Your Seat Height

Seat height is the single adjustment that changes how a bike feels more than any other, and it's the one most new riders get wrong. When the saddle is too low, your knees stay bent through the whole pedal stroke. That wastes energy, makes your thighs burn faster than they should, and over time puts real strain on the front of your knees. When the saddle is too high, you end up rocking your hips side to side and reaching for the pedals with your toes, which is uncomfortable and can make you feel unstable.

The target is simple. Sit on the bike and rotate one pedal down to the bottom of its stroke, the six o'clock position. With the ball of your foot on that pedal, your leg should be almost straight, with just a slight bend at the knee. Not a deep bend where your knee is still pointed up toward the handlebars, and not locked out straight where you're stretching to reach. A little bend. That's it.

To adjust it, loosen the seat post clamp (either a quick-release lever or a bolt, depending on your model), slide the post up or down, line the saddle up straight with the frame, and re-tighten. Always keep the seat post above its minimum insertion line, which is usually marked right on the post. If you can't get the height you need without going past that line, reach out to us rather than riding it anyway. A longer seat post may be the fix.

A quick note for comfort-focused riders and anyone coming back to cycling after a long break: many people like to start a touch lower than the ideal so they can put a foot down easily at stops. That's a reasonable choice for the first few rides. Just know that once you feel steady, raising the saddle to the proper height will make every ride easier on your legs. If you're unsure where to start, our fitting tool can help you find the right frame and setup for your body.

Step Two: Level the Handlebars to Protect Your Wrists

Once the seat is set, move up front. The handlebars control more than steering. They decide how much weight sits on your hands and what angle your wrists hold for the entire ride, and an awkward angle that feels fine for five minutes can leave your hands tingling after forty.

Here's what to look for. Sit on the bike and rest your hands on the grips the way you naturally would. If the bars are too low, your wrists will bend downward and you'll feel pressure in the heel of your palm. If the bars are rotated or raised so they're too high, your wrists bend back the other way, and you'll feel it on the top of your wrist and forearm. What you want is a neutral, level wrist: a straight line from your forearm through the back of your hand, like you're resting your hands on a table.

Most comfort bikes and trikes let you adjust the bars in two ways. You can usually change the height at the stem, and you can rotate the handlebar itself forward or backward in the stem clamp. Small changes make a big difference here, so adjust a little, sit back on the bike, check your wrists, and repeat. When you're happy, make sure the bars are lined up straight with the front wheel and that every clamp bolt is snug. Grab the front wheel between your knees and try to twist the bars. They shouldn't move.

If you ride in an upright position, which most of our comfort ebikes and electric trikes are designed for, you shouldn't feel like you're leaning heavily onto your hands at all. Most of your weight should be on the saddle. If your hands are doing a lot of work, the bars may be too low or too far away.

Step Three: Check Tire Pressure (The Answer Is on the Tire)

Tire pressure might be the most overlooked part of any new bike setup, and it's one of the most important. Tires lose a little air in shipping and storage, and a bike that sat in a warehouse and then on a truck is unlikely to arrive at the pressure you want to ride on.

You don't have to guess what the right pressure is. It's printed on the sidewall of the tire itself, usually in small raised letters. Look for a range followed by PSI. On the model in our video, for example, the sidewall reads 40 to 65 PSI. Your bike may be different, especially if you have a fat tire trike or a fat tire ebike, which typically run much lower pressures. Always go by what your own tire says.

That range is there for a reason. The lower number is the minimum the tire is designed to run at, and it suits a lighter rider or someone who wants a softer, more cushioned ride. The higher number is the maximum, and it's better for heavier riders, riders carrying cargo, or anyone who wants the tire to roll a little faster on smooth pavement. Most people land somewhere in the middle and adjust from there.

Never ride below the minimum. An underinflated tire squirms in corners, wears out faster, drains your battery because it rolls with more resistance, and is much more likely to get a pinch flat when you hit a curb or pothole. And never go above the maximum. More pressure isn't better past that point. It makes the ride harsh and puts the tire at risk of blowing off the rim.

Check both tires (or all three on a trike) before your first ride, and then make it a weekly habit. Air slowly escapes even from a perfectly healthy tube, and a quick squeeze with your thumb isn't reliable enough to tell 35 PSI from 55.

Choosing the Right Pump, and the One to Avoid

Since you'll be checking pressure regularly, it's worth getting a decent pump. The non-negotiable feature is a gauge. Without one, you're just guessing.

A good floor pump with a built-in gauge is the classic choice, and it doubles as a little workout. A small electric or battery-powered inflator with a digital readout works well too, and many of them let you set a target pressure and shut off automatically when they hit it. Either one is fine. What matters is that you can see the number while you're inflating.

Now for the warning, and it's an important one. If you have a shop-style air compressor with a storage tank in your garage, be very careful. Many of those tanks hold air at somewhere around 70 to 110 PSI. If your compressor has a regulator, the knob that lets you dial down the pressure coming out of the hose, you can use it carefully by setting it at or below your tire's maximum. But if there's no regulator, do not connect it to your bike tire. When you press that chuck onto the valve, the tank dumps all of its pressure into the tube at once, far faster than you can react. The result is a loud bang and a blown tube, and quite possibly a damaged tire.

This happens more often than you'd think, usually to people who are handy and have used that compressor on car tires for years. Car tires hold a huge volume of air at relatively low pressure, so they fill slowly and forgivingly. A bike tube is small, and it hits dangerous pressure in a fraction of a second.

If you do end up with a flat or a damaged tube, replacement tubes and tires are easy to find. But it's a lot less hassle to just use the right pump from the start.

Step Four: Look Over the Chain

With the tires sorted, turn your attention to the drivetrain, starting with the chain. On an ebike, the chain carries both your leg power and, on many models, the motor's help, so it works hard. A neglected chain is noisy, shifts poorly, and wears out the gears it runs on.

Start by looking at it. The chain should sit cleanly on the front chainring and the rear cog, with no links twisted or bunched up. Slowly turn the pedals backward by hand and watch the chain run through the gears. It should move smoothly, without skipping, catching, or making grinding noises. If a link looks stiff or kinked, or the chain seems to be rubbing against part of the frame or derailleur, that needs attention before you ride.

Next, check that it's lubricated. A new chain usually ships with a factory coating, but it can dry out or pick up dust in transit. A properly lubed chain looks slightly dark and feels faintly oily, not dry and squeaky, and not dripping. If it needs it, apply a bike-specific chain lube, one drop per roller, while turning the pedals backward. Let it sit for a minute, then wipe off the excess with a rag. The lube needs to be inside the links, not on the outside where it collects dirt.

Also check alignment. If your bike has gears, shift through them while lifting the rear wheel off the ground and turning the pedals. The chain should move from cog to cog cleanly. If it hesitates, jumps two gears at once, or won't reach the largest or smallest cog, the derailleur may need a small adjustment, which is common after shipping. Don't force it. Our team can walk you through it, and the shifting components themselves, such as the derailleur, are available if something got bent in transit.

Step Five: Test Your Brakes Before Anything Else Moves

If you only do one thing on this list, make it this one. A motorized bike reaches cruising speed with very little effort, which is exactly why it's so much fun, and exactly why your brakes need to be working perfectly before the first time you hit the throttle or the pedal assist.

Squeeze each brake lever firmly. You're feeling for two things. First, the lever should engage the brake well before it reaches the handlebar grip. If you can pull the lever all the way back until it touches the grip, the brake is too loose and won't give you enough stopping power in an emergency. Second, the lever should feel firm and consistent, not spongy, and it should spring back fully when you let go.

If a lever pulls too close to the bar, the fix is usually quick. Look where the brake cable enters the lever body and you'll find a small threaded barrel, called a barrel adjuster. Turning it outward, counterclockwise, takes up slack in the cable and makes the brake engage sooner. Turn it a little at a time, then squeeze the lever again to check. If you run out of adjustment on the barrel and the brake is still loose, the cable needs to be tightened at the brake caliper itself, and that's a good time to contact us or a local mechanic.

Then do a rolling test. Walk the bike forward and squeeze the front brake. The wheel should stop and the rear should lift slightly or the bike should lurch to a halt. Do the same with the rear. Spin each wheel and listen. A light, occasional brush from a disc brake rotor isn't unusual on a brand-new bike, but constant scraping or a wheel that won't spin freely means something is out of alignment.

Many of our trikes use disc brakes, which offer strong, predictable stopping, but every brake system needs a proper check before the first ride.

Step Six: Do a Slow Walk-Around and Check Every Fastener

This step sounds tedious, and it's the one people skip most often. Don't. Bikes go through a lot of vibration on the way to your door, and parts that were tight at the factory can work a little loose. You want to find that out in your driveway, not at speed.

Walk slowly around the bike and look at it carefully, almost like you're inspecting a used car. Then go back and touch every bolt you can reach. Check the stem and handlebar clamps, the seat post clamp and saddle bolts, the pedals where they thread into the cranks, the axle nuts or quick-release levers on each wheel, the fender stays and rack bolts, the basket mounts, the kickstand, and the brake caliper mounting bolts. On a trike, pay attention to the rear axle area and the basket, which often carries weight.

You don't need to crank down on anything with all your strength. Overtightening can strip threads or crack parts, especially on aluminum components and accessories. The goal is snug, firm, and not moving. If a bolt turns easily, tighten it until it stops with reasonable resistance. If a bolt is already snug, leave it alone.

Pay special attention to the pedals. They're threaded differently on each side. The right pedal tightens clockwise like a normal bolt, but the left pedal tightens counterclockwise. This catches a lot of people off guard during assembly, and a pedal that's started on the wrong thread or isn't fully tight will loosen while you ride and can damage the crank.

Finally, give the whole bike a gentle shake. Grab it by the saddle and handlebar and rock it. Listen for rattles and look for anything that moves when it shouldn't. A loose fender is an annoyance. A loose stem or wheel is a real danger, and something you never want to discover halfway down a hill.

Step Seven: Power On the Display the Right Way

Now we get to the electric part. With the battery installed and switched on (some batteries have their own switch or need a key turned), find the power button on your handlebar display or control pad.

Here's a tip that saves a lot of confusion: most ebike displays need you to press and hold the power button for one to two seconds. A quick tap often does nothing at all. We hear from riders every so often who are sure their brand-new bike is broken because the screen didn't light up, and nine times out of ten, they just didn't hold the button long enough. Press it, count to two, and watch for the display to come alive.

Once it's on, take a moment to read it. You're checking that everything looks normal. You should see a battery indicator, usually a set of bars or a percentage, showing roughly how much charge you have. The speedometer should read zero, since you're not moving. And you should see the current pedal assist level, typically shown as a number. Some displays also show trip distance, odometer, and other information, but those three things, battery, speed, and assist level, are what matter right now.

If anything looks off, such as an error code, a battery reading that won't appear, or a display that flickers, don't ride yet. Check that the battery is fully seated and locked in its mount, check any visible cable connections near the handlebars, and power cycle the system. If the issue persists, contact our team. Displays are usually straightforward to troubleshoot, and replacement ebike displays are available if one was damaged in transit.

Spend a minute learning the buttons, too. Find which button raises the assist level and which lowers it, and how to turn on the lights if your bike has them. It's much easier to figure this out standing still than while you're rolling.

Step Eight: Start Your First Ride at Pedal Assist Zero

This is the part of the checklist that surprises people most. When you take your new ebike or etrike out for the first time, set the pedal assist to zero. No motor help at all. Just you, pedaling, like a regular bike.

It might seem backward. You bought an electric bike, after all. But there's a very good reason. An ebike is heavier than a standard bike, often considerably so, because of the motor and battery. A trike adds the extra width and a completely different way of turning. Before you add power to the equation, you need to understand how this specific machine feels under you.

So ride around at zero for a few minutes in a safe, open area, like an empty parking lot, a quiet street, or a smooth path without much traffic. Pay attention to how the weight feels when you start and stop. Notice how the bike or trike responds when you turn. Squeeze the brakes a few times at low speed and get a sense of how quickly they bite and how much lever pressure it takes to stop. Practice getting on and off, and practice starting from a standstill.

If you're new to three wheels, this step is even more important. Trikes don't lean into turns the way bicycles do. You steer them, keeping your body upright, and you'll want to slow down before corners rather than during them. Riders who are used to two wheels often instinctively try to lean, and that takes some unlearning. A few laps at zero assist is the easiest way to build that new habit. Models designed to be easy to mount help a lot here, but every trike takes a little getting used to.

Once the bike feels familiar, once you're comfortable stopping, turning, and getting on and off, then you're ready to turn on the power.

Working Up Through the Assist Levels

When you're ready, bump the pedal assist up to level one. Then ride the same loop you just rode under your own power.

You'll feel the difference right away, and that's the point. Because you just spent a few minutes pedaling with no help, you have a baseline. Now you can feel exactly what the motor is adding. It's a gentle push, a sense that the bike is helping you along. It's a very different experience from jumping on cold at a high setting, when you have no idea what's you and what's the motor.

Ride at level one until it feels natural. Then try level two on the same route. You'll notice a much bigger boost: quicker starts, more speed for the same effort, and hills that suddenly feel smaller. Keep working up one level at a time, and only move on when the current level feels completely comfortable.

Whatever you do, please don't start at the highest level. On many systems that's level five, and it delivers a lot of power very quickly. If you're not expecting it, the bike can surge forward the moment you push the pedal, and that's how first rides turn into first falls. It catches experienced cyclists off guard too, not just beginners.

The same caution goes double for a throttle if your bike has one. Many of our trikes with throttle control can move without you pedaling at all. Treat the throttle gently at first: small, gradual twists or presses, never a full twist from a standstill, and always with your hands ready on the brakes.

Taking it step by step does two things. You get used to the bike, and in a sense the bike gets used to you: the brakes bed in, the cables settle, and you learn its quirks. Within a few rides, switching between levels becomes second nature, and you'll start choosing your assist level based on the terrain and how much exercise you want that day.

Charge the Battery to Full Before That First Real Ride

When you powered on the display, you probably noticed the battery wasn't completely full. That's normal. Lithium-ion batteries are typically shipped at partial charge, often somewhere between 30 and 50 percent, because that's a safe, stable level for storage and transport.

Before your first real ride, plug it in and charge it to full. A short test ride around the block at partial charge is fine, but if you're planning to head out for a longer trip, you don't want to discover halfway through that you're running low on a bike you don't yet know well. A full charge also gives you an accurate sense of how the battery indicator behaves over the course of a ride, which helps you learn your bike's real-world range.

Use the charger that came with your bike. Chargers are matched to their batteries, and using the wrong one can damage the battery or create a safety hazard. Charge indoors, in a dry spot at normal room temperature, on a hard surface, away from anything flammable. It's also wise not to leave a charging battery completely unattended for long stretches, and to unplug it once it's full. If you ever need a spare or replacement, use the correct batteries and chargers made for your model.

You Don't Need to Cycle a New Battery

You may have heard that a new battery should be conditioned by charging it all the way up, running it all the way down to empty, and repeating the process a few times. Some riders swear by it, and the idea makes sense if you remember older battery technology. Older nickel-based batteries could develop what was called a memory effect, where they seemed to lose capacity if they were repeatedly recharged before being fully drained.

Modern lithium-ion batteries, the kind used in today's ebikes, don't really need that treatment. They don't suffer from the memory effect in any meaningful way, and regularly running them completely flat isn't doing them any favors. Deep discharges are actually one of the things that can add wear to lithium cells over time.

So you can skip the ritual. Charge it up, ride it, and recharge it when it's convenient. Many riders top off after every ride or every few rides, and that's perfectly fine for most systems. If you're storing the bike for a long stretch, like over the winter, aim for a partial charge rather than full or empty, keep it somewhere cool and dry, and check on it every month or so.

That said, batteries vary, and the specific guidance for your model matters most. Check the manual that came with your bike for the manufacturer's recommendations, and if anything is unclear, contact us. We'd much rather answer a quick question than have you guess.

Don't Forget the Rider: Helmet and Visibility

The checklist so far has been all about the bike, but the person riding it deserves a quick check, too. An ebike changes the speeds you'll comfortably ride at, and that makes a few basics more important than ever.

Wear a helmet, every ride, even on short trips around the neighborhood. Make sure it fits snugly and sits level on your head, low enough to protect your forehead, with the straps forming a V just under each ear and the chin strap tight enough that only a finger or two fits underneath. If you don't have one yet, take a look at our helmets.

Think about visibility, too. If your bike has lights, make sure they turn on and are aimed properly. Bright clothing helps drivers see you, especially at dawn and dusk. A bell is a friendly way to let pedestrians and other riders know you're coming up behind them, which is especially handy on shared paths where ebikes arrive faster than people expect.

Finally, if you plan to carry things, check that any baskets or bags are firmly mounted and that their contents can't swing into the wheels. A well-attached basket is one of the best parts of owning a comfort ebike or trike. A loose one is a distraction you don't need on your first ride.

Your First-Ride Checklist at a Glance

Here's everything in one place. Before your first ride, and every so often after that, run through these points:

  • Seat height: slight knee bend at the bottom of the pedal stroke, with the seat post above its minimum insertion mark.
  • Handlebars: wrists level and relaxed, bars straight and clamps snug.
  • Tire pressure: within the PSI range printed on the sidewall, checked with a gauge.
  • Pump: use one with a gauge, and never connect an unregulated tank compressor.
  • Chain: lubricated, running smoothly, and shifting cleanly.
  • Brakes: levers engage well before touching the grips, with slack taken up at the barrel adjuster if needed.
  • Fasteners: every bolt snug, but not overtightened, with special attention to pedals, wheels, and the stem.
  • Display: hold the power button for one to two seconds, then confirm battery level, zero speed, and assist level.
  • First ride: start at pedal assist zero, then move up one level at a time.
  • Battery: charge to full before your first real ride, with no need to cycle it.

It's a short list, and once you've done it a time or two, it becomes routine. Most of it, like tire pressure, a brake squeeze, and a quick glance at the chain, takes under a minute before any ride.

Enjoy the Ride, and Ask Us Anything

That's the whole process. Fifteen to twenty minutes of setup, a few minutes of easy riding at zero assist, and a gradual climb through the power levels. It's not complicated, but it's the difference between a first ride that feels shaky and one that feels great.

Taking that time pays you back for as long as you own the bike. You'll be more comfortable because it fits you. You'll be safer because the brakes and bolts are right. You'll get better range because your tires are properly inflated. And you'll be more confident because you learned the bike step by step instead of all at once.

If something on your bike doesn't look or feel right during any of these checks, don't push through it. Our team is happy to help, whether it's a brake that won't adjust, a display that won't power on, or just a question about what pressure to run. You can also learn more about your coverage on our warranty page, and if you're still getting to know your new bike, remember there's a 30-day test ride.

For more setup guides, maintenance tips, and riding advice, browse the rest of our Bike Advice section. Now go enjoy that first ride. You've earned it.

GET YOUR PERSONAL FITTING CONSULTATION

No chatbots. No quizzes.

No chatbots.
No quizzes.

Dustin, Head Fit Specialist

Just honest advice from Dustin — our real bike expert.

GET YOUR PERSONAL FITTING
CONSULTATION

No chatbots.
No automated
quizzes.

Just honest advice from Dustin — our real bike expert.

Dustin, Head Fit Specialist

Dustin

Head Fit Specialist · sixthreezero

WHAT ARE YOU HERE TO FIT?

Shop

BikesElectric BikesAccessoriesGift Cards

Explore

Bike AdviceGet FittedJourney ClubOur StoryRider StylesAffialiate ProgramBecome a Brand Ambassador

© 2026 sixthreezero

Designed in Los Angeles, California